Ikelite ALL User Manual download pdf (Page 4)

PUSH TO

UNLOCK

Latch

Button

Latch

Button

Side View

Latch Closed

Diagram A

Top View

Latch Opened

Latch in FULLY

open position

Diagram B

Initial Camera Setup (for most point and shoot digitals)

- Read the camera manual thoroughly to obtain a full understanding of

each camera function before attempting to use inside of the housing.

- Start each dive with a fully charged camera battery and sufficient

unused memory.

- Set ISO to the lowest setting available.

- Set camera to least automated mode.

- Enable the close-up/macro mode to allow for close-up focusing.

- Set the flash to fire every time you shoot if using the built-in flash or

an external slave strobe.

- If possible, set the aperture to the smallest available setting.

Opening the Housing

Place the housing face down in your lap or on a flat surface.

Depress opposing latch buttons simultaneously to open housing, see

diagram A. Once the latch is unlocked, rotate the latch handle up and

away from the housing until it stops, diagram B. This motion will also

break the housing o-ring seal and open the housing back slightly. Latch

must be rotated to the FULLY open position to ensure easy opening of

the housing. Do not use metal objects to assist in opening the back.

Rotate the hinged back to its open position.

Caution: Do not operate the housing shutter control lever until the

camera is installed, otherwise shutter spring damage could occur. Does

not apply to housings with a push button shutter control.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Ikelite ALL User Manual Page 4