Ikelite ALL User Manual download pdf (Page 7)

The diffuser should be installed when using the camera flash. When

shooting close-up photographs with the camera flash and at the camera

lens’s widest angle setting, the lens port on the housing can block a

portion of the light from the camera flash. This can result in a shadow in

a lower corner of the frame. Zoom the lens to eliminate the shadow

(You can test this above water).

The deflector should be installed when using an Ikelite external strobe.

The deflector will block and redirect the camera flash to the AF35 slave

unit or an EV Controller which controls the external strobe output.

A diffuser and deflector are included

with the housing. The diffuser is white

transparent plastic. The deflector is

also white but is not transparent.

To install the diffuser or deflector,

push the “Cut-out Section” into t

port groove until it stops.

Note the Small Hole. To avoid losing

the diffuser or deflector, you can

attach a fishing line or string to this

hole.

Diffuser and Deflector Use

Diffuser or Deflector

Small

Hole

Cut-out

Section

Housings shown with Diffuser or Deflector correctly installed.

Diffuser or

Deflector

Cut-out

Section

Diffuser

Deflector

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Ikelite ALL User Manual Page 7